AC Drives,DC Drives, AC M otor, DC Motor Download software gratis

Company Profile

2009-03-09T21:32:00.000-07:00

Apikon Indonesia, PT (hereafter called Apikon) has been established since June 25, 2003 , just after the closing of PT. Kontrol Teknik Indonesia , following the restructuring of Control Techniques after being acquired by The Emerson Group. Apikon Indonesia, PT is therefore the new umbrella of PT. Kontrol Teknik Indonesia continuing the works & businesses of Control Techniques Indonesia drived by mostly ex PT. Kontrol Teknik Indonesia's personnel.

Apikon Indonesia, PT is exclusively dedicated to the sales, application and technical support of Control Techniques & Emerson Drives in Indonesia. As Authorized Distributor of Control Techniques, Emerson Industrial Automation Drives, we are closely supported by Control Techniques & Emerson Industrial Automation Drives worldwide and our engineering staff are well qualified in drives technology and experienced in the application of drives for industry.

Apikon Indonesia, PT is also the authorized distributor for industrial drive complementary product namely AC & DC Motor from Sicmemotori Italy/UK and DC Motor of T-T Electric Denmark/France as well as Soft Starter & Digital SDF Starter from Fairdford Electronics UK.

APIKON INDONESIA, PT
Ruko TPI A-30
Raya Menganti - Wiyung
Surabaya - 60228
Tel : +62 31 7673350
Fax : +62 31 7673357

GAMBAR

2009-03-05T22:50:00.000-08:00

Unidrive SP

2009-02-19T01:25:00.002-08:00

Power Range - 0.37kW - 1.5 mW

Global Power Supplies - 200/400/575/690Volts

Unidrive SP Panel Mount drives are standard AC input, AC output modules for installation within a control panel. The modules are easy to install and commission and can be applied in a wide range of applications. Unidrive SP can be configured using the keypad to operate in the following modes:

* Open loop V/Hz AC drive
* Open loop Vector AC drive
* Closed loop AC drive
* AC servo amplifier for rotary and linear motors
* Regenerative (Active) power supply

Three Control Techniques click-in option module slots allow the drive to be uniquely customised to your application allowing you to select the level of intelligence, connectivity and I/O you need.Unidrive SP Panel Mount Range
Applications

Due to the inherent performance and flexibility of Unidrive SP, potential areas for its application are limitless; the drives intelligence and dynamic response allow it to be applied in the most demanding applications while the compact dimensions make it ideal in new and retrofit energy saving installations.

Typical applications include:

* High speed machines
* Crane and hoist
* Lift and elevator controls
* Pulp and paper machines
* Energy saving with fans and pumps
* Textile machines
* Materials handling systems
* Printing
* Converting
* Plastics and rubber extrusion processing machines
* Metal production and processing
* Marine applications

Download the Unidrive SP General Spec.
Download the Unidrive SP Presentation Show
Download the Unidrive SP Flas Aplication

Commander SK

2009-02-19T01:25:00.001-08:00

1/3 to 200 hp (0.25kW to 132kW)

Commander SK is easy-to-drive and great value. The drive modules are ultra compact and offer excellent motor control. With onboard intelligence, I/O, Ethernet and fieldbus communications options, Commander SK allows you to do much more than you would expect from a general purpose drive.
Applications

Commander SK is ideal for a wide range of applications, including:

* Pumps
* Fans
* Conveying
* Mixing
* Chemical dosing
* Centrifuges
* Door and barrier opening systems
* Food and beverage applications

In these applications energy efficiency and productivity improvements often result in a rapid return on project investments.
Benefits

* Ultra-compact modules resulting from advanced thermal design, state-of-the-art power technologies and the use of a rigid SMC plastic chassis
* Optimised for both heavy duty and fan and pump applications
* Can be easily integrated within an automation system using Control Techniques click-in fieldbus option modules including Profibus, DeviceNet and CanOpen
* Ethernet connectivity allows global drive access for monitoring, configuring and troubleshooting
* Optional SmartStick allows the drive configuration to be stored and replicated - ideal as a parameter back up and for mass/batch production applications
* Optional LogicStick adds program memory for onboard PLC functionality, adding intelligence to the drive. This can remove the need for external PLCs and reduces size and costs
* Easy to use remote mounting keypad with IP65 protection
* Operation with global power supplies – 100V, 200V, 400V, 575V and 690V
* The built in EMC filter is suitable for most applications and can be easily switched in or out of circuit. When more arduous EMC standards must be met, such as for residential environments a range of compact footprint mounting filters are available
* The drive has an RS485 serial port as standard and is supplied with software and documentation CD for easy configuration and monitoring
* Low power drives may be mounted on DIN-rail for quick and easy installation
* The drive has an integrated keypad with all the parameters you need for typical applications detailed on the drive
* Worldwide product expertise and support
* Worldwide certifications including CE and UL

Download the Commander SK General Spec.
Download the Commander SK Presentation Show

Commander SX

2009-02-19T01:24:00.001-08:00

AC Variable Speed Drive 1/2 hp to 10 hp (0.37 kW to 7.5kW)

The Commander SX from 0.37kW to 7.5kW is an IP66 (NEMA 4X) protected drive that enables users to mount the drive directly next to the motor giving significant cabling, cabinet and installation savings. Typical applications include Fans, Pumps, Conveyors, Blowers, Ovens and Chillers.
Typical Applications

Commander SX is suitable for use in machines where it is useful to site the drive in proximity to the motor and where dirt, dust and other pollutants need to be regularly washed away. For example:

* Food
* Drink
* Paper
* Textile
* PackagingKey Benefits

* IP66, NEMA 4X enclosed drive - no need for separate cabinet
* Designed for ‘direct to wall’ or ‘next-to-motor’ mounting - avoiding cabling, cabinet and installation costs
* Easy setup and commissioning - the first 10 parameters cover 80% of applications
* More than 10 common preset drive applications
* Surface and corners designed to maximise washdown effectiveness
* Integral EMC filter (to generic and drive standards) for units up to 4 kW (5hp) - IP66 EMC filters, from 5.5 kW (7.5hp) as option
* Robust industrial housing with simple speed control interface - no drive installation specialists required
* Industrial standard EN954-1 categories 2 and 3 achieved through addition of PX-Secure option

Download the Commander SX General Spec.
Download the Commander SX Presentation Show

Mentor II

2009-02-19T01:23:00.002-08:00

25 A - 1850 A in Both Single and 4 Quadrant

5 to 1000 hp ( 75kW to 750kW )

Mentor II is the World’s favourite DC drive, installed in hundreds of thousands of applications, providing the reliability, power and control to increase productivity for both new machines and applications where DC motors are already installed.

Up to four Mentor II drives can be connected in parallel and series to quadruple the power range. This modular solution simplifies the handling of the individual drive units and makes the maintenance and servicing easier
Drives can be arranged to provide 6, 12 or 24 pulse systems. Higher pulse systems reduce the harmonic distortion of the mains supply current

Applications

Many DC drive applications are for retrofit systems to improve the performance and prolong the life of existing plants and machinery. New applications for DC drives include:

High Power applications
Winding and unwinding
Pulp and Paper processing
Metal Rolling and processing
Ski lifts

Benefits

Powerful onboard intelligence allows the drives functionality to be finely customised to the application and allows the removal of troublesome analogue control circuits

Standard winder and flying shear software allow Mentor to be integrated quickly and easily
Modular approach to high power drives allows multiple Mentor II drives to be connected in parallel or series to economically achieve the required motor current and voltage rating
MentorSoft, a windows based software, provides an intuitive environment for configuring the drives functionality
Our knowledge and experience in DC drive systems allows us to recommend the best solution for your individual circumstances
Mentor II integrates closely with the Control Techniques AC drives using CTNet, drive-to-drive communications
Regenerative and non-regenerative modules available to suit your application
Fieldbus options including Profibus and DeviceNet allow Mentor to be integrated within an automation system
Worldwide expertise and support

Download The Mentor II General Spec.
Download The Mentor II Presentation Show

Small DC Drives

2009-02-19T01:23:00.001-08:00

Our low cost DC drives offer efficient, cost effective, speed control of conventional shunt wound and permanent magnet DC motors. Four models are available:

* Puma - 0.18 to 0.37kW
* Cheetah - 0.55 to 1.5kW
* Lynx - 0.55 to 7.5kW
* 4Q2 - 0.55 to 7.5kW

Key Features

* Operate in speed or torque control mode
* Armature/tacho feedback scaling
* Current feedback scaling
* Separately adjustable speed acceleration / deceleration ramp
* Accepts 0-10V and 4-20mA torque and speed reference
* Cheetah SM is available in an optional IP40 rugged enclosure
* The 4Q2 model provides full quadrant control of speed and torque

PUMA

CHEETAH

LYNX

4Q2

Download The Small DC Drives General Spec.
Download The Small DC Drives Presentation Show

Unimotor

2009-02-19T01:22:00.001-08:00

Unimotor FM 0.72Nm - 136Nm

Unimotor FM is a high performance brushless AC servo motor range matched for use with Control Techniques drives. FM is an acronym for Flexible Motor, designed to accommodate a wide range of applications. The motors are available in seven frame sizes with various mounting arrangements and motor lengths.
Applications

Unimotor FM is suitable for applications where precision motion and/or dynamic control is required.

Typical applications include:

* High speed machinery
* Flying shear and rotary knife applications
* Pick and place
* Materials handling
* Printing
* Textile machinery

Benefits

* Unimotor FM allows various feedback devices to be used. As standard an incremental encoder is fitted as this offers an optimum balance of cost and performance. SinCos and SLM feedback can be selected for increased resolution and Resolver feedback is available for increased reliability in extreme environments.
* High peak torque values allow smaller motors to be used where the RMS value is low but the maximum torque is high.
* A wide selection of ready made cables are available for quick and easy connection to Control Techniques drives.
* High inertia versions are available to allow the motor inertia to be more closely matched to the load inertia for increased performance and stability.
* IP65 environmental protection is standard.
* Motor brakes may be integrated within the motor. A choice of parking brake or high energy dissipation brake is available.
* Flexibility of the Unimotor range ensures the best fit for your application; as well as the various physical sizes and feedback devices available, options extend to the type of connectors fitted.
Download the Unimotor Brochure

AC Motor

2009-02-19T01:21:00.002-08:00

Emerson is the worlds largest manufacturer of motors for industrial and commercial equipment, Control Techniques has access to the extensive product range from our sister company - Leroy Somer. LS Motors

Leroy Somer specialise in the design and manufacture of industrial AC and DC electric motors, mechanical power transmissions and alternators. Leroy Somer operate 38 production facilities in Europe, USA, China and India, employing over 10,000 people.

Leroy Somer Motors

Leroy Somer LS, LSMV and FLS motors offer a standard series of AC motors that cover the power range from 0.55kW to 750kW. The rugged and flexible design means that the motors can be applied in virtually any application.

Efficient PerformanceMotor Design

The electrical, magnetic and mechanical design of the motors have been developed using sophisticated modelling techniques such as finite element analysis that ensure exceptional thermal and torque generating performance and optimum motor reliability. Leroy Somer motors are high efficiency to minimise energy consumption which, combined with Control Techniques drives, offers an energy optimised solution for your applications.

High levels of shock and vibration resistance ensure the motors are reliable in the most demanding applications such as steel production, dock cranes or cement works.

Flexible Power

Leroy Somer motors are available with a wide range of choices to ensure the motor matches your application needs. Various feedback devices, insulated bearings, safety brake and thermal protection methods are available. FLS motors can be specified with CORROBLOC for an anti-corrosion finish that enables the motors to be used in humid, corrosive or harsh environments.

Global Service

A standard range of motors are available for immediate delivery up to 300kW at 400 Volts. Control Techniques and Leroy Somer sales and support centres are located around the World to ensure that service and expertise are just around the corner.

Intelligence

2009-02-19T01:21:00.001-08:00

SM-Applications Lite V2

The SM-Applications Lite module is designed to provide programmable control for standalone drive applications or when the drive is connected to a centralised controller via I/O or Fieldbus. SM-Applications Lite may be programmed using ladder logic with SyPTLite or can make use of the full automation and motion capabilities contained within SyPTPro.

* Easy Powerful Configuration – SM-Application Lite can be used to tackle automation problems from simple start/stop sequencing with a single drive to more complex machine and motion control applications.
* Real Time Control –The SM-Applications Lite module gives you real-time access to all of the drives parameters plus access to data from I/O and other drives. The module uses a high speed multi-tasking operating system with task update times as low as 250us. Tasks are synchronised to the drives own control loops to give you the best possible performance for drive control and motion.

SM-ApplicationsSM-Applications Plus

SM-Applications offers all of the features of the SM-Applications Lite module but with additional communications and high speed I/O. SM-Applications is programmed using SyPTPro system programming tool.

* Inputs/Outputs – The module has two digital inputs and two digital outputs for high-speed I/O operations such as position capture and actuator firing.
* High speed serial port - The module features a serial communications port supporting standard protocols such as Modbus for connection to external devices such as Operator Interface panels.
* Drive-to-drive communications - SM-Applications option modules include a high speed drive-to-drive network called CTNet, this network is optimised for intelligent drive systems offering flexible peer to peer communications. The bus has the capability to connect to remote I/O, operator panels, Mentor DC drives and PCs using an OPC server.

SM-RegisterSM-Register New - High Speed Motion & Registration Control

SM-Register is designed to provide a flexible, high performance solution for programmable motion requiring high speed registration features. It is ideal for applications such as printing, packaging and cutting machinery.

* Motion programming using PLCopen or Control Techniques’ Advanced Position Controller (APC)
* Programmable in user defined units
* Two fully independent registration capture channels
* Storage for 256 events per channel, microseconds apart
* Pattern recognition
* Speeds in excess of 1000m/min can be handled
* Ability to filter unwanted marks (i.e. splashes, dirt, text etc)
* Filtering capability:
o Minimum and/or maximum pulse width
o Distance from previous edge
* Compensation for registration sensor throughput delay

SM-EZ MotionSM-EZ Motion

The SM-EZ motion option module and Power Tools Pro software provides a user friendly environment for motion programming. The EZ-Motion approach is ideal for applications that are low volume and low engineering time.

* Simple drag & drop programming allows you to create programs “out of the box” without having to write a single line of code
* Programming completed in 5-steps, the software guides you through drive configuration, I/O configurations and programming steps
* Familiar Windows™-based environment with simple data entry
– “Fill-in-the-Blank” values
– “Point and Click” Radio Buttons
– “Scrolling” menu selections
– “Drag and Drop” parameters
* The module has four digital inputs and two digital outputs for high-speed I/O operations

LogicStickLogicstick

Inserting the LogicStick into the front of the drive adds the memory required to allow the Commander SK to execute a ladder logic PLC program. The PLC program is able access the drive parameters, option module I/O and Real Time Clock (RTC).

Communication

2009-02-19T01:20:00.003-08:00

SM-Ethernet
Our Ethernet option module supports Ethernet/IP and Modbus TCP/IP; it has an inbuilt web server and can generate emails. The module can be used to provide high speed drive access, global connectivity and integration with IT network technologies such as wireless networking.
SM-Ethernet

* Modbus TCP/IP, Ethernet/IP, e-mail, web pages, SNTP
* Addressing is IP based
* Data rates 10Mbps/100Mbps
* Cyclic data sizes of up to 80 words in/out
* Explicit messaging supported
* Non-vendor specific A.C. Drive Profile supported

SM-Profibus

Profibus DP slave option module

* Profibus protocol up to specification DP-V0 and DP-V1
* Up to 125 nodes on a network
* Data rates up to 12Mbps, automatically detected by the module
* Cyclic data sizes of up to 32 words in/out
* Non cyclic access available by mapping a non-cyclic channel into the cyclic data
* DP-V1 adds a non-cyclic channel
* Vendor independent profile for variable speed drives, PROFIdrive

SM-EtherCAT

EtherCAT slave option module for high performance servo applications

* Up to 64535 nodes on a segment
* Data rate of 100Mbps (100BASE-TX)
* Update 40 axes in 200μs (assuming 2 words command data and 3 words feedback data per axis, a control word and basic cyclic synchronisation data)
* Jitter of less than 1μs (less than 500ns with Unidrive SP 3, 6 and 12KHz switching frequencies)
* Non-cyclic data using the CoE mailbox
* CANopen DS-402 profile supported (drives and motion control)

SM-DeviceNet

DeviceNET option module

* Up to 62 nodes on a network
* Data rates up to 500Kbps, automatically detected by the module
* Cyclic data sizes of up to 28 words in/out
* Non-cyclic access supported using the explicit data channel
* Vendor Independent assembly objects for basic, extended speed and torque control

SM-CANopen

CANopen interface supporting various profiles including several drive profiles

* Up to 127 nodes can be on a network
* Data rates up to 1Mbps, automatically detected by the module
* Up to 4 cyclic data channels, each containing up to 4 words in/out
* Non-cyclic data available: SDO non-cyclic protocol or mapping non-cyclic channel into the cyclic data
* Vendor independent profile supported: DS-402 profile supported (drives and motion control)
* A CT specific drive synchronisation mechanism implemented for synchronisation of position loops between drives on CANopen network
* Object dictionary extendible with an SM Applications module

SM-Interbus

Interbus interface option module

* Up to 63 nodes on a network
* Fixed data rate of 500Kbps
* Cyclic data sizes of up to 10 words in/out
* Non-cyclic access supported using standard PCP protocol

SM-CAN

User programmable CAN option module - Allows you to develop your own CAN protocols

SM-SERCOS

Sercos Interface

* Up to 254 nodes on a network
* Data rates up to 16Mbps
* Cyclic data sizes of up to 5 words in/out
* Non-cyclic data available: SERCOS service channel
* Vendor independent profile supported: Torque, velocity and position

SM-Lon

LonWorks interface for building automation applications

* Up to 32385 nodes on a network
* TP/FT-10 cabling 78Kbps Twisted Pair
* Non-cyclic peer-to-peer messaging
* Vendor independant profiles supported: Variable Speed Motor Drive and Node Object function blocks

Feedback

2009-02-19T01:20:00.001-08:00

SM-Universal Encoder Plus

Additional combined encoder input and output interface supporting Incremental, SinCos, HIPERFACE, EnDAT and SSI encoders

The SM-Universal Encoder Plus module provides the drive with an additional feedback port with the same functionality as the base drive, supporting:

* SinCos with Commutation
* Quadrature Incremental
* Pulse and Direction
* SSI

The option module also provides a simulated encoder output that can be programmed to operate in the following modes:

* Quadrature Incremental
* Pulse and Direction
* SSI

The module also incorporates high speed inputs for position capture.

SM-Encoder Output PlusNEW

Incremental encoder input and output option module to enable connection with external motion controllers

SM-Encoder Plus

Incremental encoder input option module

SM-ResolverSM-Resolver

Resolver option module for robust feedback in demanding environments

This module enables the drive to measure the speed and position of motors and machines fitted with resolvers. Due to their ruggedness, resolvers are often used in hot, demanding environments. The option module also offers a simulated incremental encoder output.

SM-SLMSM-SLM

SLM option module for integration with SLM enabled motion controllers

Inputs and outputs

2009-02-19T01:19:00.001-08:00

SM-I/O 32NEW

Extended digital I/O adding 32 bi-directional I/O points

* 32 x Digital high-speed, bi-directional I/O

SM-I/O Plus

Extended I/O interface to increase the number of I/O points on a drive

* 2 x Analog Inputs (10-bit plus sign, +/- 10V)
* 1 x Analog Output (10-bit plus sign, +/- 10V)
* 3 x Digital Inputs/Outputs
* 3 x Digital Inputs
* 2 x Relay Contacts (2A @ 240V, 4A @ 30VDC)

SM-I/O Lite

Extended I/O inteface with reduced functionality

* 1 x Analog Input(+/- 10V bi-polar or 4-20mA)
* 1 x Analog Output (0-10V or 4-20mA)
* 3 x Digital Output
* 1 x Relay Contacts (2A @ 240V, 4A @ 30VDC)
* Quadrature Reference Encoder Input

SM-I/O Timer

Extended I/O option module with real time clock

* Access to Year, Month, Day, Hour, Minute, Second, and Daylight Savings Mode.
* 1 x Analog Input(+/- 10V bi-polar or 4-20mA)
* 1 x Analog Output (0-10V or 4-20mA)
* 3 x Digital Output
* 1 x Relay Contacts (2A @ 240V, 4A @ 30VDC)
* Quadrature Reference Encoder Input

SM-I/O PELV

Namur standard I/O interface with high speed I/O

This module provides PELV (Protective Extra Low Voltage) double insulated digital and Analog I/O to meet IEC61131-2, Clause 3.3.1 Type as well as NAMUR NE37 specifications for chemical industry applications.

* 1 Analog Input (current/voltage mode)
* 2 Analog Outputs (0-20mA, 20-0mA, 4-20mA and 20-4mA)
* 1 Digital Input
* 4 Digital Inputs/Outputs
* 2 Relay Contacts (2A @240VAC, 4A @ 30VDC)

SM-I/O 120

This module provides digital I/O rated to 120VAC

* Conforms to IE6 1131-2 120 VAC Standard
* 6 Digital Inputs (120VAC or 3 Digital Inputs @ 240VAC)
* 2 Relay Contacts (2A @ 240VAC, 4A @ 30VDC)

SM-I/O 24V Protected

Designed as an over voltage protected I/O Solution ModuleSM I/O 24V Protected

* 2 x Analogue Outputs (0-20mA, 20-0mA, 4-20mA and 20-4mA)
* 4 x Digital Inputs/Outputs
* 3 x Digital Inputs
* 2 x Relay Contacts (30VDC)

Beckhoff I/O

Flexible I/O system for remote connectivity using Control Techniques CTNet drive-to-drive network

CTSoft

2009-02-19T01:17:00.002-08:00

CTSoft is a configuration tool for commissioning, optimising and monitoring Control Techniques drives. It allows you to:

* Easily configure the drive using wizards
* Read, save and load drive configuration settings
* Manage the drive's smartcard data
* Visualise and modify the configuration with live animated diagrams

CTSoft is free of charge and can be obtained by contact the our Customer Service

CTScope

2009-02-19T01:17:00.001-08:00

CTScope is a full featured software oscilloscope for viewing and analysing changing values within the drive. The time base can be set to give high speed capture for tuning or intermittent capture for longer term trends. The interface is based on a traditional oscilloscope, making it familiar to engineers across the globe.

CTScope is free of charge and can be obtained by contact the our Customer Service

SyPTLite

2009-02-19T01:15:00.000-08:00

SyPTLite is an easy to use ladder logic program editor suitable for simple drive applications for replacing relay logic or a micro PLC. SyPTLite can be used with Commander SK and Unidrive SP onboard PLC or with SM-Applications Lite option module.

SyPTLite is free of charge and can be obtained by contact the our Customer Service

SyPTPro

2009-02-19T01:14:00.000-08:00

SyPTPro is a full featured automation development environment that can be used for creating solutions to single or multiple drive applications. The programming environment fully supports three industry standard programming languages: Function Block, Ladder and Structured Text. Motion can be configured using PLCopen function blocks supporting master and slave axis configuration.

SyPTPro is also used to configure CTNet, a high speed drive-to-drive network that links together multiple drives, SCADA, operator panels and I/O to form an intelligent networked system.

SyPTLite is free of charge and can be obtained by contact the our Customer Service
Download the SyPTPro Presentation Show

Job Available

2009-02-19T01:13:00.000-08:00

Sales Engineer
(Surabaya)
Requirements:
1. Male
2. At least Diploma graduate in Technical.
3. Experience in sales of industrial equipments.
4. Good negotiation & selling presentation and communication skill.
5. Fluently in English (oral and written).
6. Living in Surabaya area

Please send your resume and a recent photograph to:

setiowati@apikon.com